As a result, the MFI has a direct correlation to the polymer's melt viscosity. In MFI testing, the polymer is not dissolved in a solvent, but rather is tested in the melt state. Both these techniques involve dissolving the polymer in a good solvent to form a dilute solution, so that individual polymer chains can be interrogated directly (in the case of GPC) or indirectly (in the case of viscosity modification in dilute solution viscometry). How does MFI correlate to the molecular weight of a polymer? At CPG, we often measure molecular weight by gel permeation chromatography or dilute solution viscometry. It is easy to see that lower viscosity materials will result in a higher MFI, since more material can be extruded for a given amount of time. This mass, normalized by time, provides the MFI. The amount of material extruded through the die at the bottom of the annulus is measured by weight for a measured period of time. A plastometer consists of a temperature-controlled cylindrical annulus through which a polymer melt is extruded by pressurization with a weight-loaded piston. This testing is normally performed per ASTM D1238 or ISO 1133 using a plastometer. The certificate of analysis for polymer resins often includes a melt flow index (MFI) or melt flow rate (MFR), reported as grams of material/10 min under a specified temperature and load.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |